Husqvarna 20" 60cc Rancher Chain Saw 460 "ran gas" Questions

...gas it ran at first not good with the dry rotted gas lines so i replaced them now it seems to be getting to much gas it spits gas out back of carbuerator Check if carbs floutlevil is ok and check if ...

...gas ran out and refilled and restarted. Just talked to someone who said you cannot let the saw run until it ran out of gas or you'll destroy the engine. I did see sparks on either saturday or sunday ...

...gas it is not i ran the saw without oil in the gas it is not locked up but it won't start I think if you remove the sparkplug and muffler and examine the cylinder you will find parts of the piston ...

...until I ran out of fuel. I don't know what the gas to oil ratio is Most chainsaws in the United States operate on a 50:1 oil to unleaded gasoline ratio. Some manufacturers recommend a 40:1

...gas once before the whole motor was ruined but has ran just fine many times since then sprayed wd 40 into carb did get one backfire but still will not start check the carburetor. If you have a stiff ...

...RAN OUT OF GAS. REFILLED GAS WITH LAST YEARS BATCH OF 40:1 RAN FOR ABOUT 2 MINS AND CHOKED OUT, AND WOULDNT RESTART. GOT NEW GAS, AND OIL 40:1 CANT EVEN GET IT TO ACT LIKE IT WANTS TO START. WHAT ...

...ran out of gas, why is it doing that? Hi Fill the gas tank with new fuel.Priming the engine(put some gas in the sparkplug hole for few times and start the engine until it runs constantly):There is ...

gas choked and started ran out of gas filled with gas and oil then it would not start Have you checked the spark plug? and did you try moving the switch to differnet setting like half coked full coked

ran out of gas put gas in wont start,pulled spark plug and put a little gas in ,it fired but wont stay running,the primmer bulb seems to be not working Hate to tell you this but if you didn't mix ...

...ran my generator since jan. 07'. Tried to start it and no go??? Can be several things. More than likely stale gas. Take the gas line off of the carb. or the tank. Let all of the gas pour out. Remove ...