Onkyo TX-SV454 Receiver "stuck protect mode" Questions

stuck in protect mode My sony str-d1090 audio receiver is stuck in protect mode! how do i resolve the problem? Protet mode is a special diagnostic mode that starts when a fault is detected. When in ...

stuck in protect mode I have reset, unplugged everything and powered down but still stuck in protect mode Hi, I have a Sony STR-DE425 and about a month ago It went into PROTECT mode and now no matter ...

receiver stuck in protect mode stuck in protect mode when I turn on receiver surely i can reset this myself without paying sony!

...str-dh810 in protection mode Stuck in protection mode disconnectedall speakers, unplugged unit, tightened all screws, used air compressor, and is still in protection More than likely a blown

Amp was in protect mode now when I try to do anythhing it seems tobe stuck on md and no sound comes out Try to set to un-protect mode and check if the audio will come out.

stuck on standby I been using my denon amp for 2 years now and yesterday While I was watching a movie the sound went POP! and the amp went into standby mode. I let it cool down and turned it back on ...

stuck in standby mode on Fisher RS-911A receiver My Studio-Standard Fisher model RS-911A stereo receiver is stuck on standby mode regardless of power cycling or any attempts to play audio. Does it ...

stuck in protect mode have followed all the trouble shooting suggestions. Even with no speakers attached still goes into protect There's nothing more you can do. It is likely a shorted output ...

...stuck in the protect mode with the flashing mcacc light so it wouldn't turn on. When I bypass the auto protect mode by holding down tune down and zone 2 on/off, the receiver turns on then off again. ...

...stuck in standby mode!!!!! Could be blown, most receivers now a days have overload protection that protects them, try disconnecting or checking your speaker wiring and turning it on again. Also try ...