20 Most Recent Onkyo TX-SR605 Receiver Questions & Answers


Hi Rex, if you get this on your display please give us a call so that we can walk you thru this diagnostic, you can reach our Product Support Team at 800-229-1687 as they are here 24/7 ready to assist, Thanks, JT

Onkyo TX-SR605... | Answered on Mar 30, 2019


This works for some Onkyo receivers Hold down the VCR buttton on the receiver (not remote) and press the main power/standby switch.

Onkyo TX-SR605... | Answered on Nov 20, 2018


Measure all hdmi inputs and output HPD Voltage by a needle probe.
Steps:
(1)unplug the amp.
(2)open the cover.
(3)connect a blu ray player to hdmi input & a mon to output, otherwise no 5V.
(4)negative probe connected to the large heat sink with large power transistors mounted by a crocodile clip.
(5)postive probe to right hand side last pin called hot plug detect, HPD.
(6)If it has 5V, hdmi board is OK. Check HDMI cables(7)If no 5V, check power to this board. Go to you tube:How to fix an Onkyo receiver - TX-SR606 . All large capacitors next to SMPS IC are replaced.
(8) If not OK, replace Q 8595-Q8597.
(9)If not OK, replace Q8501,sil9135.(Onkyo won't help you to replace this HDMI decoding Chip. A HDMI board replacement instead, the company policy.)

Onkyo TX-SR605... | Answered on Oct 04, 2017


The only thing I can think of is that the microphone that detects speaker signals is in a position that blocks the sound from that speaker. When it's testing there should be no noise from anything or anyone.

Onkyo TX-SR605... | Answered on Jun 12, 2017


Hello, I am sorry about your issue. Please plug the cable box into a known good HDMI port on the receiver. Confirm that there are no issues with the cable or plugs. Thank you, CB

Onkyo TX-SR605... | Answered on May 31, 2017


The chances are that you have selected an incorrect sound setting or not switched it on, for the HDMI you are using. With Onkyo receivers each connection will have it own settings for video and sound. You just need to look in the manual as to how to select the settings.

Onkyo TX-SR605... | Answered on May 09, 2017


Does any good sound come through headphones, if you plug any in?

Onkyo TX-SR605... | Answered on Apr 24, 2017


Hello, sorry but we do not have any additional codes. Thank you, Onkyo USA

Onkyo TX-SR605... | Answered on Mar 31, 2017


Hello, if you have the speaker set up microphone I suggest that you use it to calibrate the speakers and it will set the distance and delay. Thank you, Onkyo USA

Onkyo TX-SR605... | Answered on Mar 03, 2017


Hello, I am sorry about your issue. I suggest that you reset the receiver. With the receiver on press and hold vcr/dvr and then press on/standby. When the display shows clear let go. The receiver will shut down. Unplug for 30 seconds. Plug back in and turn on. Test audio. This procedure will bring the unit back to factory defaults. If this does not resolve your issue I suggest contacting Onkyo at 800-229-1687 option #3 so that we can troubleshoot with you. Thank you, Onkyo USA

Onkyo TX-SR605... | Answered on Mar 03, 2017


It's often a problem with some of the soldering joints underneath the Digital Sound Processor (DSP). Need to be fixed at a service center.

Onkyo TX-SR605... | Answered on Sep 02, 2016


Same problem. Does the internal Cooling fan turn on?

Onkyo TX-SR605... | Answered on Aug 17, 2016

Not finding what you are looking for?
Onkyo TX-SR605 Receiver Logo

334 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Onkyo Audio Players & Recorders Experts

Ted28

Level 1 Expert

5 Answers

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

The Knight
The Knight

Level 3 Expert

76046 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Onkyo Audio Players & Recorders

  • Onkyo Audio Players & Recorders

Most Popular Question

onkyo tx sr605 system zone 2 used work

  • Audio Players & Recorders
Loading...