HP 1901w Monitor "lcd controller" Questions

...LCD controller IC in the lcd controller board. that no signal was sent out to the lcd driver ic thus you could only see white display on the screen. A replacement of LCD panel might be the solution. ...

...LCD controller (part of the LCD panel) is not getting the 5vdc from the logic board or the LCD controller board has blown fuse due to short circuits, see what LCD controller looks like here: ...

...LCD controller board (part of the LCD screen) is loose or has bad contacts. Or the LCD controller board is bad, in this case the LCD panel will have to be replaced. ...

...LCD controller board (part of the LCD panel) is not getting the 5vdc power feeding it from the logic board through the ribbon cable, it is either the cable came lose or dirty contacts, or failed 5V ...

Philips LCD monitor Philips LCD pop up message every minute or so OSD main control unlocked let volume control be pushed forever, use glue or something. And buy new LCD

...LCD controller IC in the lcd controller board. that no signal was sent out to the lcd driver ic thus you could only see white display. A replacement of LCD panel is the best solution. I suggest to ...

...the LCD controller IC in the lcd controller board. that no signal was sent out to the lcd driver ic thus you could only see white display. A replacement of LCD panel is the best solution. best ...

...LCD controller (part of the LCD panel) is not getting the 5vdc, there is a flat connector from the main controller PCB to the screen, there is also a surface mounted on the LCD controller board. You ...

LCD from controller board then it should be a data cable and that to is not measure it.You've to really becareful for the cable that connect LCD backlight to inverter cos that is almost 1000 V!!!! But

...LCD controller board. I disconnected it from the LCD controller board side. When power is applied, now the power LED comes on. So apparently there is a component on the LCD controller board bringing ...