Fellowes DM8C Cross-Cut Shredder "red light switch office" Questions

...Red light always on when Rexel RSS1627/RSX1227 Red light always on when switched on. Showing full even after emptied, Any suggestions? thanks I have an Acco Rexel RSX 1227 shredder.  Can you use ...

...by more than one problem. The bucket it not properly placed under the shredder or the safety switch is stuck or bad. I am sure there is also other reasons the could cause the red light staying

light and red light go on. No motor sound?? hi, Turn it off and let it sit idle for about an hour. This should cure an overheating problem For no power and green light and red light go on, the problem

2602, we show a steady red light indicator that is preventing the shredder from working. Is there anything we can do to fix this on our end? Did you chech the BIN FULL SWITCH and the FRONT DOOR switch

...LIGHT ON RED LIGHT BLINKING MACHINE WILL NOT GO IN FORWARD OR BACKWARD Common reasons for this is dirty or blocked sensors on top and under the cutter asm.Also, the waste basket door sensor or switch ...

...red overload light stays on with the unit switched to auto/on position will not accept paper to shred or switch on in forward position when the paper is inserted Most likely the cutters are still ...

...red light turn on what do i do if the red light turn on an wont turn on Check your power supply, but usually there is an internal fault with the Motor, or switch. basically all they are is a switch, ...

I have a fellows 420 cc power shredder that will not start when paper is inserted if ther are no red warning lights lit, then you will have to replace the auto feed senors or the main power switch.

red light appears at switch, will not run cleared paper jam Obtained the operating manuel form MBM Business Machines web site and found the answer by reading the manuel troubleshooting section..