Question about Whirlpool Washing Machines
cycle. Wash,rinse and then spin. Hi, Your timer motor burnt out, or timer faulty, remove top back panel (back of timer) and check timer motor, if timer motor are built-in (electronic type) you'll have
Question about Kenmore Washing Machines
...cycle. Broken timer? When the cycle doesn't advance, it's probably the timer or a cold-water supply problem: It's the timer, if your washing machine fills with water and begins agitating, but the ...
Question about Kenmore Washing Machines
cycle with broken timer If the timer on your Kenmore washer is broken, there are a few things you can try to get the spin cycle to run: Manually advance the timer: If the timer is stuck or not moving,
timer stuck on cycle will work if manually moved My washer gets stuck on the cycle. I can manually turn the timer to each of the cycles and it will run the cycle, I have to guess how long to leave on ...
...replacing timer contacts inside of timer are not losing contact which in returns the timer thinks it has been told to continue cycle. replace timer. not hard to do but timer is around hundreded
...cycle the timer would stop and I would attempt to advance it hoping to solve problem. Didn't seem to work. Once in awhile I could get the cycle to advance but it would again stop and never complete ...
...cycle (but timer won't move)and the timer only moves on the super wash cycle. This machines timer is bad ,basically you have bad contacts in the timer ,that why it only works at certain parts of ...
Question about General Electric Washing Machines
to set the wash cycle. Use the on/off knob only for starting or stopping the machine. Don't press or pull too hard on the on/off knob or you will wind up pushing the cycle selector off the timer shaft
...CYCLE, THE TIMER TICKS AUDIBLY, WHEN NEXT ASPECT OF CYCLE STARTS IE: SPIN OR RINSE, TICKING STOPS. ONLY SEEMS TO HAPPEN BETWEEN CYCLES WHILE MOVING TOWARDS NEXT CYCLE. PLS ADVISE/THANK YOU IN ADVANCE ...
Question about Kenmore Washing Machines
...the problem probably is not the timer but some other component such as the transmission shifting mechanism. If the problem occurs when using only one cycle setting, the problem is a bad
466 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions