Kenmore 23822 Top Load Washer "90 series cycling" Questions

...90 series that i have to run through drying cycle twice before the clothes get dry" "I have a Kenmore 90 series that i have to run through drying cycle twice before the clothes get dry" try washing ...

...90 series wont advance to next cycle I have the Kenmore 90 series washer and I have to manually turn the knob to each cycle. Would this be cause by the timer ??? Yes, most likely but to be sure you ...

...90 series washer will get stuck in between cycles My Kenmore 90 series washer works fine washing my clothes, but after the wash cycle it won't go to rinse. I have to agitate the machine a couple of ...

Series 90 washer loud clicking during Slow wash cycles, Fast OK. Our Series 90 washer makes a loud, repetitive "clicking" sound during all wash cycles except for the Fast cycle. The clicking sound ...

...90 Series washer The spin cycle is intermittent on a 10 year old Kenmore 90 Series Washer with model number 110.26934691. I've already replaced the clutch, the timer and by pass the lid switch. The ...

...series 90 is leaking kenmore washing machine series 90 leaks water on the floor. do I need to take the back off to check hoses inside the machine? My Kenmore 90 Series washer is leaking water on the ...

...90 Series trouble with spin cycle My 90 series front loader washer (model 110-22922-100) is not spinning properly. It will only spin with light loads. When it doesn't spin at all you can hear the ...

...90 series loud whirring/howling noise during spin cycle after rinse cycle, the water starts to drain, makes a loud whirring/howling noise, seems like a something loose trying to catch on gear and ...

90 series washer spin 90 series washer after wash cycle it will drain but not spin unless i push in the knob and pull it back out than it will work Replace the timer. Thanks for using FixYa - a 4 ...

...90 Series Washer has slow spin cycle My kenmore 90 series 26912 washer model 110.26912691 has a slow spin cycle. It will spin properly when empty but any load causes it to stop. No bearing noise is ...