...Same thing twice more. Unplugged it twice. Tried every cycle. Will not spin, drain, or open. Our clothes are held hostage. What do we do? if the error code is SE it needs 2 be manually ...
...needs to be put on spin twice to remove the water you will find the is an issue with the drainige, if the waist pip is pushed to far down the drainage or if you have lint build up it will greatly ...
...needs two spins to remove water I have a Kenmore 90 series washer, model 110.28912790. The washer works fine other than not getting the water out of the clothes on the first spin. Always have to spin ...
...once or twice then it will start to spin again part number 285785 clutch is slipping.need to pull motor /trans to replace.less than an hour need spanner wrench hope this helps,please rate my ...
Question about Fisher Washing Machines
...needs replacing. Cutting power while in spin mode is not a good thing for the control board as it sends DC power to the motor. The motor generates AC power and sends it back into the board and ...
Question about Electrolux Washing Machines
twice then stops for a couple of minutes, turns then stops. It then indicates cycle ended but didnt rinse, spin or drain or spin. These can be done by turning control to relavent function (spin, drain
...SPIN SPEED and SOIL LEVEL buttons simultaneously to enter QC test mode and check the frequency of the water level, if the display shows 248 or more: NO: Check the sensor switch assembly and also the ...
...Spin twice to advance it. When I select Delicate it starts washing (without even pressing the Start button). I've entered the service mode and run Quick Test cycle. It passed. I've run the buttons ...
Question about Kenmore Washing Machines
...spin the basket by hand there is very little resistance -- does that suggest that a belt needs to be replaced? Thanks! Alisha My washer is draining the tub but it's not spinning .Would this be minor ...
...spin cycle twice to get most of the water out of the clothes. Is there anything I can do or do I need to get a repairer in. Thanks in advance for any help you can provide. Hi, It sounds like the ...
20 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions