When was my Kenmore electric dryer made? model 417-83142300 Serial XD4 2813382 It is vibrating and making a scraping noise when running and I am trying to decide to repair or replace. Replace the belt
41742052100 washing machine how to replace a belt on a front loader washing machine model number 417-42052100 try removing back or top Kenmore Washer Won Spin
Question about Washing Machines
...belt fell off my kenmore fl washer, how do I replace it? Good morning, I just opened up he my Kenmore washer front load model 417-42042100 and the belt has come off. I don't see a tension bar, so how ...
Question about Kenmore Washing Machines
...check two things,. One is, is the belt broken or stretched, the other is the motor, is the motor turning if the motor is turning then replace the belt. If the motor is not turning replace the
Question about Kenmore Washing Machines
...replace the belt if it looks at all cracked or frayed. If this dryer is not a 417 and/or does not have a rear bearing, it's best to get a maintainance kit (belt, idler pulley and drum rollers) and ...
model washer through normal wear and tear. Newer versions of the coupler are more resilient and resist breaking The motor coupling is located between the drive motor and the transmission and takes the
...belt (if there is one on this model) is working fine. Any suggestions, I am an IT guy not a appliance guy... replace your door lock switch it will run fine till you git to final spin then stops if i ...
...belt and that was ok. The rest of the cycles are good, the washer fills and drains but no motor action? do you have any error codes coming up?could be a bad door switch,bad motor control unit or mcu ...
...model 417. It was making a rattle noise and opened up the dryer door and sparks appeared to fly out the holes from the back. Not sure if something mananged to get through lint trap (I don't see any ...
...Belt is fine. Washer is a front loader. Model#417-41142000. [email protected]. Thank you. You may be right, but before you rule completely on the motor, have you checked the Spin Control ...
463 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions