noise from the motor or timer. But I am unable to get into this washer as the top is screwed to the sides of the washer in all 4 corners. Can't get to the screws. How do I get into the washer, the top
...noise when agitating counterclockwise during the wash cycle. It seems like I just need to tighten it down somehow. Machine # GE 3.2 Cu. Ft. Super Plus Capacity Washer Model #: WHDSR316GWW Anyone with ...
...noise. Is this hard to replace? How do I get the back off of the washer? This is something that can be done yourself and is very easy. First on the console you will find 2 screws depending on the ...
...front of the washer, grasp both sides of the rear panel and pull towards the case. The rear panel should be seated and flush with the casing before inserting the retaining clips. 2. Insert the ...
...popping it out. Pull the machine out about 18 inches and tip it back, resting it against the wall. Remove two more screws behind where the recess was holding the pump housing on. Reach under the ...
Question about Frigidaire Washing Machines
...front panel off (2 screws). It looked similar to catdriver's picture in Solution #4 (thank you). I unscrewed the top part of the rubber hose and pulled off, then used viseclamps to pull the bottom ...
front. Opened it up with the large trash bag (THANK YOU FOR THAT RECOMMENDATION!), there was ALOT of water coming out, would have been a real mess without that bag trick. I had tons of change and lint
popping the retaining taps free with a screwdriver. If you hear a rattling noise, I would recommend you check the drain pump first as "titelines" suggested. It is common for items to get lodged in the
noise in spin cycle Without being there all I can do is give you a step by step walk through on how to check key components . 1) Unplug the machine. 2) At the head, or control panel, find the two
1,909 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,023 Questions
908 Questions