Kenmore 24032\24036 Top Load Washer "vacuum suck" Questions

Ad

Question about Kenmore Washing Machines

1 Answer

...works but will not drain It goes theu the wash cycle and then it will not drain it hums. I have cleaned out the dain hoses and filters Get a wet/dry vacuum and suck the hose clean form the waste

Ad

...cycle, on full F -06 error code Hi, F06 is a water level fault. It will either be due to a faulty vacuum switch (which is the hockey-puck thing with the little tube to it, or it will be not

Ad

...be? Get a wet dry vac and remove the filter in the vac so you can suck all the water out of the tub of the washing machine then slide the washer out so you can remove the drain hose and vacuum it

Question about Maytag Washing Machines

1 Answer

...After the spin cycle the cloths are soaking wet ceck for kinks in the drain hose .if you have a wet vacuum try sucking on the drain hose, or fallow the drain hose into the back of the unit to see if ...

Question about Washing Machines

1 Answer

vacuum and suck the debris off the water valve screens. when you turn the water back on use a 5 gallon bucket and turn the water on into it. That will clear the calcium from your water shut off at the

Question about Asko Washing Machines

2 Answers

...suck in on vacuum unit to stop pump or simply switch off. I would suggest you also consider your detergent. I had this probelm and looked it up on line and discovered that liquid detergents can ...

Question about Whirlpool Washing Machines

1 Answer

...water can't be sucked in). Turn on the vac and hold the mouth of the drain hose to the mouth of the vacuum hose. Get the hoses as low as possible when you do this. When the vac is full, RAISE UP THE ...

...vacuum switch that monitors the water level. If you unscrew the top panel Shields and the back shield you will notice a clear tube hose that runs up to a plastic device. That is the switch I'm ...

Question about Electrolux Washing Machines

1 Answer

...or turn to fix this problem Hi from retired Englishman in SW France, You have actually posted your vacuum cleaner problem onto the washing machine forum ;-0( However I suspect there could be ...

...in an avanti 758ps washing machine? I would either use a shop vacuum and suck it out or compressed air and blow it out. Either way, you will need to disassemble it to do this. God bless your

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

3,909 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...