Kenmore 24032\24036 Top Load Washer "remove 80 series" Questions

Need to remove the back panel off of the Kenmore series 80 Need to know how to remove the back cover off of the Kenmore Series 80 washing machine. Don't do that, Mike! Access is from the front... SG

...remove agitator Kenmore 80 Series I have a Kenmore 80 series. I removed the softener cap and agitator screw at the top but the agitator is still stuck and it won't come out. I used a rope to put it ...

...80 series fills with water then doesn't start wash no sound the lid switch under the control panels bad replace it and it will again wash,they just unsnap out of the top of the cabinet after you ...

...is likely a leak from the delivery side of the hot water inlet solenoid. The only way to check is to remove the top and look. https://www.google.com/search?q=Kenmore+80+series+washer+92281100+leaks

80 series is leaning. How can I remove the top to fix it? Check out the link to the following video that I am providing. Should point you in the right direction. ( I sure hope so, anyway). Best wishes

...80 series kenmore washer...how? Hi, Remove the cap on the agitator and then remove the inside cover. There is a 7/16" bolt under the inside cover. Remove the bolt and the agitator will lift out. ...

80 series model 110 after clothes are done washing they are still soaking wet what can i do without calling repair man? when empty and off, open the lid and see if you can rotate the inner wash basket

80 series washer and a newer Estate dryer. I had a ring in my jeans front pocket and accidently washed it still in the pocket. Didn't realize it until the clothes were dry. Loo Not sure where else

80 series that over flowes help please Kenmore 80 series washer that overflowes I had the same problem with a 90 series and there is a small hose connected to the water level knob that had slipped off