Kenmore 44072 Front Load Washer "change drum belt hotpoint aquarius" Questions

change hotpoint drive belt un plug appliance, remove lid and back plate, place belt on motor and carefully on drum pully, turn pully to pull belt onto its, its quite tight to do but is possible, watch

...drum from a Hotpoint WM64 washing machine? I need to change the bearings. Remove top cover and rear panel. Remove belt and drum drive pulley.Remove clamp that secures door seal Remove top control ...

...machine . the belt appears to short even when ive loosened the motor right off can you help me please the belt seems to be too short, how can i get the belt on the motor and the pulley on the

...cable tie at 11 o'clock position. Pull round once more and the belt will jump on. Turn it all back and remove the cable ties. Check the belt position is good and not slipping down between

drum wont rotate, is it belt driven from the motor, if so how do you get in to change? cant get lid off take the back panel off to get to ure belt, but first put ure hand inside ure machine n spin the

...drum manually (by removing the top and using the belt) The machine then carries on with the wash for various periods of time before tripping the electric again. Could you offer any guide as to the ...

...belt. Spin drum by hand from the inside of the drum, if it feels rough, or is noisy and rumbling, then the main bearings have gone. If there is no apparent noise, then you will have to investigate ...

...drum has difficulty in moving. I the stop the machine and take some more clothes out, it then does run smoothly. I now put less and less clothes in my machine, could you please solve my problem. Does ...

...change worn bearings the shaft will get scored eventually and it's a much more expensive job. Slip the drive belt off and turn the drum by hand. If it's quieter now, then the motor bearings are ...

...CHANGE OF BRUSHES DOES NOT FIX IT LIKELY TO BE CONTROL (NEXT CHAPTER) Thanks for your solution. I had the same problem (drum not turning), saw this post, ordered my brushes and just fitted them. Drum ...