Kenmore Elite 45986 Front Load Washer "washing machine keep ticking" Questions

spraying water and then the minutes just tick down as the machine keeps trying to spin. I can hear it wind up and wind down but nothing happens. do you hear any sound while stops?? like ticking sounds

keep trying to lock the door? does it make a ticking noise? if so you need a new central electric board. does it also give an f11 error code? these machines are notorious for this problem. It's caused

...washing machine when i try to start it on any program,the red LCD screen lights up, the start/pause button blinks, but when I press start/pause,it doesn't start.It just keeps ticking at me. The LCD ...

i set the SPIN mode when suddenly I heard a tick sound. After which, the start and end cycle keeps on flashing. I already tried to put the machine off but it keeps on flashing.. is it a fuse problem? ...

...washing machine. The ticking noise could be an indicator of a fault in the machine's control system. To troubleshoot the issue, you could try the following steps: Unplug the machine from the power ...

The over comes on, but wil notcome back on when more heat is need The over comes on, but when it reaches the proper temp , it will not come back on to give it the heat needed to continue cooking. The ...

My washer tub has dropped 1 1/2" to 2" inches? What would cause this to happen? and the washer keeps ticking but wont spin or drain. thanks The entire tub and basket assembly is suspended by 4 ...

...washing machine washes and then stops at the rinse cycle...but you can hear tick, tick, tick...and then the dial moves but the clothes don't get washed! Same for the spin cycle. If I push in the dial ...

bosch wfl 1800 starts filling then stops with a ticking/clicking noise near controls motor brushes are probably worn out will need replacing not expensive but have to remove motor to get at them. I ...

...controller board has a fault and needs replacing, but please go to a washing machine repair person as this is lethal 230 volts AC your dealing with its only for an electrician to do this safely ...