Kenmore Elite 45986 Front Load Washer "stays stuck agitating" Questions

...stuck between the outside of the barrel and the plastic skirting...that is what was keeping my barrell from turning or agitating. Make sure when you call you repairman..try to be in there when he/she ...

...stays in wash cycle-will not drain or spin If your washer won't drain, check these: It spins, but doesn't pump It doesn't spin or pump It pumps, but the water returns It spins, but doesn't pump If ...

...stays there. It will not move into next cycle. When I open door and bypass switch to watch the cycle it appears to agitate but I can hold the agitator and move it freely. I can place it in another ...

The agitater is not solid and clothes catch under the arms on the bottom and tangle and have even ripped. What can be done about to stop this? It seems like a design flaw to me. It is not the best of ...

...stays still.Everything else is fine. Had the same problem with mine, could be a number of things but in my case it was a relatively simple fix - but you'll need to buy a part. Open the lid and look ...

...stuck in agitator, and will not allow it to move. First turn the machine off and make sure it is unplugged from electrical receptacle. * Inside the machine, place each hand under the base of the ...

...stuck in spin then either the timer or a cold-water supply problem is causing this : It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if ...

...gets stuck in wash cycle. It agitates and drains but stays in wash mode. Is there a way to fix this? possible problem program board not progressing call in a technician for a proper diagnosis and ...

...stuck agitating this morning. The water had drained but did not rinse/spin because soap was still on the clothes. When I try to start it again, no matter where I put it in the cycle, it will only ...

...stuck in wash cycle until the knob is manually turned to rinse/spint/etc. Would this be a bad knob or timer or both? Thanks! Start a cycle and remove the knob. If it still stays in agitation mode and ...