Kenmore 63942 Dryer "clothes start check" Questions

...dry my clothes, it turns on okay, but the clothes ends up not drying, it stays wet. i would start by checking the thermal fuse and then the heating element itself. Check the vent for ...

...dry...and sometimes longer. Check the timer, and the sensor. Sounds like it is having a problem with the timer or sensor no noticing that the clothes are still wet. Please rate if satisfied. Thank ...

...completed drying a load of clothes. When I push the start button, nothing happens. I have checked the breaker and the plug, both are OK. I just completed drying a load of clothes. Kennmore

...clothes in the dryer that wasn't dry. I close the door and pushed the start button and the dryer would not start. I've checked the circuit breaker and it's ok. check the door switch in the corner of ...

...clothes are not too wet. What is the problem? It sounds like the blower is not forcing air through the dryer. I would start by turning the dryer on and checking the vent exhaust to see if there is a ...

Was running fine then went to check on the clothes and it was stopped. The clothes were still warm. Check the breaker and nothing. Will not start. the motor sounds bad

...start in the "Off" or "Wrinkle Prevent" position. Long Drying Times 4 Remove the lint screen. Clean it and replace it. 5 Check the temperature of the room. The dryer will not operate properly in ...

...check again.start unit and go outside to vent and check for good warm airflow..80% of clothes drying concerns are related to restricted air flow not helping to get rid of the moisture in the ...

...clothes at the start of a wash cycle. it is advised to not run full cycle in the washing machine with no clothes for it can damage the unit. Wynne, check your manual, some washers actually ...

...clothes dryer will not start when start button is pushed? check door switch, thermal fuse, the push start button all with multi meter. and of course the house outlet to see full voltage is coming out ...