Kenmore 63942 Dryer "coil glow bright red" Questions

...coil of wire around a nail(battery powered when you were a kid) and you could pick up small objects magnetically. HOWEVER, you also say that the ignitor glows "bright red"--how old is the dryer? The ...

burner does not light up on gas dryer even though igniter glows bright red probably the coil on the gas valve, can ohm test with a volt meter

...coil kit, the igniter glows bright red - but no flame, no heat check the thermal fuse in the dryer vent duct to be open,then if not the flame eye" radiant sensor" or the high-limit thermostat both on ...

...glow coil does glow a very bright yellow white color, that solenoid is working. If the glow coil fails to light, replace that part only. <Use caution-glow coils are not cheap and break easily.> ...

glow bright orange-red, then after a couple seconds you should hear a "Click" which is gas valve opening and a blue flame ignites for heat. If no glow is seen after a few seconds or at least a minute,

...glow bright orange, then shut off without igniting the gas? (When the gas ignites there's a large blue flame.) If so, there may be defective coils on the gas valve. Mounted on the top of modern gas ...

...coil turns bright red. I was lighting and then immediately going out. Now it won't light at all (no flame) but the element turns red. Any idea on what could be wrong. Incidently I tried disconnected ...

...Glow heater turns bright red for about 10 sec at appropriate times. resistance of internal gas valve 1 and 2 is approx 10 MegOhms which I think is normal. Lint filter is clean and I have tested with ...

...glow bright orange, then shut off without igniting the gas? (When the gas ignites there's a large blue flame.) If so, there may be defective coils on the gas valve. Mounted on the top of modern gas ...

...coil glows bright red for a while, but there is no flame. The coils seemed warm to me the last time I tried running it for a while, but I'd like to know how to test the components so I don't have to ...