...working but as I try to type it doesn't "advance". Any help? You may be in the stencil mode. There should nbe a lever that selects red, black or stencil move it to black. ...
..., IF I TYPE B , A DIFFERENT PRINT INSTEAD . Turn the machine off and allow it to rehome itself. If that doesn't help the printwheel homing pawl is probably broken. you will need a tech. ...
Question about Brother Office Equipment & Supplies
daisywheel doesn't print the correct letter when typed daisywheel doesn't print the correct letter when typed Probably the print wheel homing pawl is broken you need atech. DickyO
Question about Brother Office Equipment & Supplies
type letter on the keboard another letter types on ink pad ? this happen after i've taken ribbon out & put it back in. Turn the T/W off and on the printwheel should reset if it doesn't the P/W
...when turning the yellow wheel, it will type half a letter and then the tape still doesn't move. Can you please help me with this problem? Thank you, John Hayden [email protected] 623-376-9780 ...
...to change the KBII settings, but it doesn't help. What do I do to make it type the right letters again? Check the pitch selector slide switch on the L. side it should be at 10 or 12 not PS. ...
I am hitting certain buttons and the incorrect letter or symbol is being typed If the printwheel doesn't have bent spokes or you are in a language or KBII mode the printwheel homing pawl is likely
...xxii ribbon won't turn When I go to type, the ribbon won't turn so it uses the ink in one spot and then doesn't do anything. either the ribbon is bad or the ribbon feed mechanism needs ...
I doesn't types Actualy it doesn't do anything; just a little bit of noise.- what model??
the incorrect letters and symbols are being typed If the printwheel doesn't have bent spokes or you are in a language or KBII mode the printwheel homing pawl is likely broken. You need a tech. ...
600 questions posted
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions