Question about Brother Office Equipment & Supplies
reset the drum. Anyway, here's how to do it (form the brother web site) This message would appear if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem
Question about Office Equipment & Supplies
...is still there. Try removing the drum unit with the fax machine turned on.After reinstalling the drum check the display for a "new drum?" message.Answer "yes" and the mashine will reset the ...
Question about Brother Office Equipment & Supplies
...drum. To reset the drum counter, follow the instructions listed below. Open the front cover. Press the Options key on the control panel. The display will show "REPLACE DRUM - 1.YES 2.NO". Press 1 to ...
Question about Muratec Office Equipment & Supplies
..."REPLACE DRUM" AT WHICH TIME THE UNIT WILL STOP PRINTING. When the new drum cartridge is then installed...the REPLACE DRUM indicator will be reset. DO NOT replace the drum before the machine says
Question about Muratec Office Equipment & Supplies
...reset it. Only replace the new drum into the machine when the machine says "Replace Drum"...NOT when it says "replace drum soon". As a last resort a complete memory clear is PROGRAM,*,3.....but be ...
...reset the drum counter follow the instructions listed below : Get the message to appear in the LED 1. Open the front cover. 2. Remove and Re-insert Drum/Toner unit 3. Press the CLEAR key. 4. Press 1 ...
...reset the copier canon NP 6412 shows the message CC on display? CC means you will have to replaced your drum unit. The part number is F43-5411-700. About $150.00 There is a chip in the unit that ...
Question about Brother Office Equipment & Supplies
Change Drum Soon still shows after changing the drum unit How do I clear the change drum soon message? After changing the Drum, open front cover and press "clear" then press "1" to reset.
Question about Brother Office Equipment & Supplies
...Reset drum counter How do you reset Brother IntelliFax-4100e Fax drum counter. Swapped drum, but still says it needs to be swapped. With the front cover still open, you should press Clear ("Replace ...
Question about Minolta Office Equipment & Supplies
reset. by plugging off the unit from power for one night and then using it again. Hi, Problem: CO200 Solution: Add additional drum ground* *Minolta has come out with a factory ground plate. The part #
3 questions posted
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions