...inside the stapler. The stapler holder will pop out at the front, then pull it further out and load with staples. May be an easier way, but this what worked for me. In general, you push down on the ...
Question about Office Equipment & Supplies
...inside and maybe find the problem? thanks Turn the stapler over, remove the batteries, then remove the black pads and the four screwa under them. Take off the bottom cover and you will see the clear ...
...stapler is otherwise clean and free of loose staples. On my unit, the problem was caused by two large, half inch bushings decomposing with age, on which the "hammer" pivots. This in turn caused the ...
...and apply light grease in gears and change any broken part. 2-something is blocking the paper path (staplers-pins)droped inside. 3-malefunction of paper detection micoswitch please confirm free ...
-check inside for any foreign object droped inside(pins--stapler-any small pieces of torn paper.------check microswitches in paper path for broken lever and test it with your hand and feel free moving
...inside like (stapler-pins)--confirm that paper jam switch in good condition and it is lever not broken and can move in free motion.-chek for small pieces of torn paper and clean the paper path. ...
183 questions posted
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions