Screen dull on Janome mc 8000 My Janome MC 8000 display screen has suddenly gone dull it is hard to read do I need a new screen or is there a bulb behind the screen?thanks. Try this link for an ...
My Memory Craft 8000 visual screen is blank i tried to adjust the lighting but can still hardly read it. I have to use a flash light in a dark room in order to try to read it. Any suggestions? Your ...
...8000 memory craft machine, without a manuel and a power cord. Any help on how to aquire these item would be greatly appreciated. Locate a Janome dealer and have him order them for you. The power cord ...
8000 the machine stopped reading the memory cards.Will sew on the other functions but not with the cards. Help!!!! Most likely you will have to remove the covers and find the fuse on the circuit board
...8000. Can you please help me Karen Glover feed dog switch is at the back of the machine, use your lt hand and feel down the back behind the foot, it should switch to the left and right and drop the ...
8000 and I believe the timing of the hook and needle is ''off''. I have opened up the top plates and I can see that the needle is not properly aligning with the hook -- the hook is bending the needle.
Question about Janome Sewing Machines
I want to sell my 1991 New Home memory Craft 8000 sewing machine I want to sell my 1991 Janome New Home Memory Craft 8000 that's in excellent condition. What should I ask for it? I have purchased ...
How to back stitch on a Janine 8000 Do you mean the Janome Memory Craft 8000? If so, look to the right of the top thread path. There are three buttons. The middle button is the reverse button. If you ...
My Janome memory craft 8000 will only sew backwards and the screen shows step motor error. the machine is 19 years old. Is this fixable? step motor error may mean the embroidery arm is out of position
Question about Janome Sewing Machines
...8000? As I begin to thread at the top there is no tension - does not seem to be catching the tension mechanism-therefore the stitches are unbalanced. I have attempted to move the tension dial but to ...
184 questions posted
Usually answered in minutes!
565 Questions
193 Questions
102 Questions
90 Questions
79 Questions