use #69 nylon thread, and "G" bobbins. If the thread's breaking at the hook you may need to adjust timing. But most commonly thread breaks because of improper tension, threading, needle or thread size
breaking thread signals that the tension needs adjusting.) Snap out the faceplate to remove it & to gain access the bobbin area below the sewing needle. Remove the bobbin case & bobbin-lifting
thread keeps breaking or pulling out of the needle. When i sew on cotton it was working then when I switched to a stretchy faux crushed velvet the tread would break after just a few stitches. Good day
Question about Janome Sewing Machines
thread keeps breaking on my janome 1600p-dbx sewing machine. I have changed my needle, just had it serviced but i can only free motion quilt about 6" before the thread breaks. What can I do? Check the
thread feeds in the right direction from the spool. It can also be a tension issue.. tight upper tension or tight bobbin tension. Bobbin tension may be adjustable manually, but it's pretty rare for it
and then adjust from there. Why is my thread breaking Why Does My Top Thread Keep Breaking Sewing Machine Why Does My Thread Keep Breaking While Sew Sewing Machine Problem 1 Thread Breakage ..........
Question about Singer Sewing Machines
Manual to check threading and tension. https://www.manualslib.com/manual/454760/Singer-1021.html#product-1022 Thread breaking in general https://www.google.com/search?q=singer+1022+breaking+threads .
Question about Sewing Machines
thread keeps breaking after I sew just a little bit. I have changed thread, check it is put on correc. Please advise. Not sure if I have the top tension correct. 1. While threading put the foot up. 2.
...breaking thread I have a White 2037 and I've never yet managed to do twin needle sewing. My thread always breaks after a short while of sewing. I put a spool plus a bobbin on the spool pin, then ...
259 questions posted
Usually answered in minutes!
565 Questions
102 Questions
90 Questions
79 Questions