Question about Sewing Machines
...they stay as 4 straight threads is this a knitting machine or a serger?if it's a serger try checking to see if the needles are in backwardsif they are in correctly then try some new ...
stay separate from the chain? Also, when I threaded the 4th thread through #6 in the manual ("Lay the thread in the notch on the thread take-up lever"), I put it through the tiny hole. Is that correct
...last. 1 - Take the threads out of both needles. 2 - Thread both loopers according to the diagram on your serger. 3 - Thread the needles. If this fails, you need to bring it to a pro for
...serger an it sounds perfect and acts like its sewing but there is no thread staying on the material.... I have tryed to rethread it several times and it does not help at all. What could be wrong and ...
...serger model EA-605. When trying to sew a straight (double chain) stitch, the thread keeps coming out of the top needle. (the looper stays threaded. I have double checked the threading and tension. I ...
...serger keeps cutting one of the under looper strings and wont stay threaded Here's an owner's manual:
Usually, if the machine breaks thread, it is because it is threaded incorrectly, the ...
Question about Husqvarna Sewing Machines
Serger will not stay in place when it has been reinserted after working in a 3 thread mode. The set screw appears to be fine but will not tighten against the needle. I have tried different needles and
Question about Sewing Machines
...serger 101-548 I am unable to install the converter to use 4 threads on the Euro Pro Shark 011-548. I am following every step of the instructions but there is no way this little piece will stay in ...
...serger, followed the threading instr. to the letter, using one top needle and it will NOT sew! All tensions are set correctly according to the manual, and using one thread in the lower and one thread ...
...serger thread why the lower looper thread always gets stuck & breaks even following the correct threading method? The lower looper thread MUST be threaded before the needles are threaded. You must ...
259 questions posted
Usually answered in minutes!
565 Questions
102 Questions
90 Questions
79 Questions