Singer Quantum XL-1000 Computerized Sewing Machine "bobbin assembly machine" Questions

...the bobbin will not wind. This whole assembly seems so flimsy! the machine should be checked by a sewing machine technican to see what wrong with the bobbin winder, the assembly may need to be ...

...hook behind bobbin assembly If thread is getting wrapped behind the bobbin assembly, most likely your machine needs service as thread behind the bobbin assembly should not be a normal occurrence.

...bobbin assembly. I am restoring this machine. I took out the hook and bobbin assembly to clean. Now I can't figure out how to put it back in. My daughter has a Singer 7033 machine. The thread tangled ...

...bobbin assembly loose and turn your hand crank and move it until the hook is at the top. Pull assembly apart and clean the assembly with qtip and sewing machine oil. It will likely be dirty that is ...

...bobbin assembly. (Do not shake the bobbin assembly up and down). When the tension is right, the bobbin assembly should fall slowly and as you stop the movement, the assembly should stop. The ...

bobbin assembly 'jumped' and jammed when doing a simple quilting-decorative stitch. I went back to the dealer and had the bobbin assembly replaced as it was clear the needle had hit the plastic rim of

bobbin assembly and carefully replace it and ensure it is locked in with the straight metal spring that is on the right side of the assembly. The assembly has to be with bobbin holder to the rear. The

...bobbin.  Check that tension assembly for anything that could be stuck in it, preventing the assembly from putting tension on your thread, such as another thread. Wiggle the disc on the assembly ...

bobbin case carrier one way and than the other until it comes out of the rotary hook assembly. Don't pry too hard or you might damage the carrier and/or rotary hook assembly. Once removed, I think you

...bobbin assembly The assembly keeps popping out. I thread the machine and pull up the bobbin thread but when I start to stitch the bobbin bunches, the needle breaks and then when I open the bobbin ...