GE 24 in. GSD4030Z Built-in Dishwasher "heat pump motor hums start" Questions

Ad

...pump water then stops, then start again. It attempts to start pumping water 3 or 4 times them turns off leaving the water in the tub. I have read about the water needing to heat up for the cycle to ...

Ad

Question about GE Dishwashers

1 Answer

...pump never kicks on. There's just a humming, then a clicking sound, then a faint smell of maybe burning?? This is motor failuer. replace asap. the smell is the motors copper windings heating up the ...

Ad

everything but the dishwasher never starts..just takes a humming sound It sounds like the pump motor has failed but the timer is working to turn on the heating element. Recommend you replace the motor

Question about KitchenAid Dishwashers

1 Answer

...hand (or screwdriver) just to make sure its free moving. Put it back into machine & see what you get. Could also mean that the capacitor on the main pump (if it is a capacitor start motor) has

Question about Dishwashers

1 Answer

pump cycle and heat dry cycle function properly. Is the wash pump and drain pump the same? The wash pump and drain pump are different. So it is likely the wash pump is choked and trips or the motor is

...heat dry cycle. Is the wash pump the same as the drain pump? The wash pumo and drain pump are different. So it is likely the wash pump is choked and trips or the motor is faulty. ...

Question about GE Dishwashers

1 Answer

...motor is being stressed. We have been using the Anti-Bacteria mode for the past couple months since the dishes were ...which seemed to help. When we ran the rinse only mode it was quiet and did not ...

Question about Kenmore Dishwashers

1 Answer

pump that is burnt out? if so, what exactly needs to be replaced? Any ideas are welcome. Could be the motor is stuck. This is a common problem in dishwashers. With the power turned off, open the front

Question about KitchenAid Dishwashers

1 Answer

...pump has either got a clog or is a gonner, as we say. humming is a sign its trying to run, there is current across the armature, but it is stuck. could be the starter windings or it could have a ...

Question about Kenmore Dishwashers

5 Answers

...pump (motor) is stuck. The solution to this is to get to the motor impellor turn by hand and free up the rotation of the pump, and then put it back into the machine. If you are unable to free up the ...

Not finding what you are looking for?
Dishwashers Logo

23 questions posted

Ask a Question

Usually answered in minutes!

Top GE Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a GE Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...