Dell Inspiron 1501 PC Notebook "monitor display goes black" Questions

...if yes, try to re-install your video driver and check if display is ok on your laptop. if both doesnt have display (external monitor and laptop's display) i suspected your lcd display is

...display went black. The hard drive indicator was flashing so I assumed the machine was running. I cycled the power and tried it again and the results were the same. Try pressing Fn + Monitor. It ...

...monitor is the lcd correct? now when you turned on the laptop and sees dell logo it means display is ok. after windows logo or after you type in your password display goes black? try startup repair ...

display is fine with the external monitor, it means to say that there's something wrong with your LCD's backlight. You may have to contact Dell Technical Support to check if your system is still under

...display. Backlight might be going out. Either you can just get an external monitor and leave it connected or have it repaired. I'm not sure you wan to try this yourself unless you're especially ...

...monitor - try reseating the lcd/display cable refer to instructions @ http://support.dell.com/support/edocs/systems/ins1300/en/sm/display.htm#wp1105347 if still the same, lcd needs to be

...monitor to see if you get a display. If you do, then your LCD display has a problem and needs to be replaced. If you have a Mini 1010 there is an HDMI jack on the right side of the laptop where you ...

...display on the external monitor without any problems. It will display everything and play videos just fine. (I also have a 4 year old Inspiron 1300 laptop which has the same problem - so I am willing ...

...monitor and nothing. I can never get the display to work. Could this be a mother board or a video card? Any ideas?? Your help is really appreciated!! Thanks, Rey with the external monitor attached ...

display from ext monitor is fine then problem is the LCD panel, cable or inverter. Also check if the flickering cause by the HDD and when try loading to windows it goes blank screen. run a diagnostics