Lenovo IdeaPad S10-1208Uw Netbook "remove light symbol pc" Questions

...remove and reinsert battery. Next look at the plug light, is it green? If your laptop computer runs normally on the ac adapter, but the battery won't charge, please try the following troubleshooting ...

...light indicators in front if lit up: -power -battery -wireless -harddrive if there is power: 1.) try to powerdrain-if no go 2.) try to go in to safe mode by pressing F8 on the first screen you'll be ...

...while the power cord plug in to see if that help. if you remove the battery and leave the power cord plug in, the battery symbol indicator light will turn off. Time to order a replacement

battery light with lightning symbol flashes red and green remove the battery and just connect the power cord and see what is the status.may be your battery is not getting chage or it is faulty.

...symbol. Do I need a new battery? Should there have been some warning? My system is plugged into a UPS, so I don't think a power surge caused the problem, plus no other electronic appliance in the ...

...light up. When you press the power button, nothing happens. I used the computer, it was working fine. I shut it down properly, put away in the case, pulled it out 4 hours later and it would not turn ...

is plugged in. if i remove the battery completely the yellow light doesn't even turn on. do i need a new adapter? battery? Need a new battery, I believe. Just find hp compaq nc8340 battery replacement

light blinks on and off in orange. What can I do to fix the problem, it started shortly after my baby touched it and my system went into max battery then low battery to hibernation. try to power drain

...light comes on but only lasts for about 20 seconds and goes off. I also do not get the little battery/charge/lightening symbol thing anymore on the bottom right toolbar. Remove the battery use a old ...

...the small lighting like symbol will flash, and nothing happens. What should I do? may be ur RAM is loose. if u can remove the RAM and reiinstall it then it should work. else take it to a service ...