Question about Frigidaire Washing Machines
remove the transit packing materials inside the machine ? Front loading washing machine normal design is for the drum assembly to be supported by two or more springs at the top, and two dampers at the
...even surface. What now? FIRST OF ALL THE PERSON WHO INSTALLED THE MACHINE SHOULD HAVE REMOVED THE TRANSIT BOLTS YOU MAY BE LUCKY THAT ONE OF THE SHOCKS MAY HAVE COME OUT OR A SPRING MIGHT HAVE ...
transit bolt, i have check catalogue but there is only writtem that remove transport bolt before using but no pictorial location is mentioned to find out. Should just be able to use after removing the
...Check the 3 transit bolts on the backside of the machine. Should be removed. Could also be a problem with the balancing spring on the top of the drum, so the drum tilts a bit forward, and cause ...
...just balancing itself out or have the bearings gone?It has done this since we bought it. have you removed all the in transit bolts are the main springs all there supporting the drum ...
...spring section of the rods. Also - there are suspension springs on the bottom of the tub that could be broken and/or missing. Replace/repair as necessary. Also - be sure the drum locking (transit) ...
...ok. It is set level. Checked drum tension springs / drum belt and made sure transit bolts had been removed, which they have. Seems to be coming from outer steel drum to its plastic casing? Any ideas ...
...remove the front control panel? I need to do this to fix the LED power on light and the program control child lock spring both of which have become dislodged during transit. I've removed the drawer, ...
Question about Washing Machines
and remove the transit brackets, saving them safely for future use. Perhaps that part of the installation was forgotten? If the transit brackets have been removed, your new machine is probably a dud..
68 questions posted
Usually answered in minutes!
327 Questions
237 Questions
124 Questions
99 Questions
84 Questions