Question about GE Kitchen Ranges
...to the ignition spark problems. If you take off the burner cap and head (for some models), the electrode will be visible. Clean off any carbon build up on the electrodes for better sparks. Cindy ...
...spark ignition problem. This is one of the newer models, bought in 2008. The gas works fine, as the gas shoots out of its respective stove. It's just that only the front-left sparkler ignites, no ...
...to re-seat the burner head and see if it will light using the electronic spark. You may have to try re-seating the burner head by turning it to a different position until you feel it seat into
spark both heard and seen but if i use a match theyll lite hi, when you have the burner head on the stove look at where the igniter (sparker) is, in line with that should be a hole in the burner head,
head. Even if it looks clean, wipe the tip of the electrode with a clean, dry paper towel and PRESS IT DOWN. Re-assemble and try the burner, again. Check to see if the burner works, If not, then go to
Question about Kitchen Ranges
...stove. I can see that the spark is occurring well below the tip of the igniter so I suspect a cracked igniter. How do I replace it when... ...the screws to release the burner units and lift the stove ...
Question about Roper Kitchen Ranges
...spark control switches closed to burner control valves could cause that...may stop clicking in a day or so..or if on low flame setting the orfices on the burner head are carbon restricted? clean ...
...stove top ignitiers work intermitantly. They spark sometimes and others they don't. I have tried cleaning everything I can think of including the screws that are used to ground the heads, but nothing ...
Question about Maytag Kitchen Ranges
...stove MGS5770ADB - Burners will not light - ignators Ignators will not spark? Where is the spark module on this model? The spark module should be behind the rear panel of the range, or behind the ...
...spark. The most common problem is boil overs have happened on those two burners. Take the burner head off for sealed burner ranges and clean them out. For non sealed burners, the little holes toward ...
581 questions posted
Usually answered in minutes!
1,163 Questions
104 Questions
83 Questions
77 Questions
70 Questions