GE JVM1542 Microwave Oven "fan continue run" Questions

...fan and turn table continue to run. When I open the door the fan and turn table stops and the light comes on. If I closed the door the fan and turn table come back on. I have check the door switches ...

mmv5165bas vent fan will not stop running The vent fan on my Maytag microwave started running continuously yesterday after working normally for some years. All else continues to work normally, but we ...

fan continues to run. I left a cup of previously boiled water to see if the microware was running and it is not. The issue is the fan, also I checked the switches on the door and they are in place. At

...run The cooling fan continues to run after I'm done using the microwave. It use to run for a short while and then shut off. I have unplugged and plugged back in and the fan starts running and ...

JVM1530 When plug in microwave vent fan runs JVM1530 I installed the microwave for recycling exhaust according to the instructions, but when I plug it in the vent fan runs continuously even when the ...

...RFS12SW2 The fan keeps running even door is open , it wont stop. These microwaves are designed to run the fan for a couple mins after the cook cycle to continue cooling the electrical

...fan on my Sharp Carosel II microwave continue to run? Model R-8560 Opening and closing the door has no effect on the fan shutting off. The only way to stop the fan from running is to unplug it. From ...

fan continues to run when door is closed Microwave is still functional. Cooks as usual. Just can't close the door when finished and food is removed as the interior fan continues to run. One of

...run after time is up. The fan does not circulate, but it continues to heat. Our microwave in office won't shut off. It continues to heat and fan is running as soon as we close the door. Tried ...

...fan continue to run after cooking. Microwave heats and keypad works but fan and light will not switch off after cooking is complete. Tried unplugging the unit but problem continues. Could this be due ...