GE Advantium 120 Convection/Microwave Oven "top grill trips circuit" Questions

...top grill vent first, then you can remove the screws coming in from the top of the grille vent then that will expose a screw holding down the control panel at the top. Remove the screw and remove the ...

top next to the fuse behind the Plastic Grill and then a small metal grill. Some are behind the control panel, to fix this remove the screw at the top and then slide the control panel up and it should

...top grill and removing the screw at the top of the control panel? Where is the breaker located and how do I know which one is the correct one? CVHS The problem was the fuse. It is up and working ...

...circuit breaker (it did not trip). Any suggestions? It may be a blown fuse or the thermal cutout (T.C.O.) or thermostat on the magnetron or on top of the oven cavity. There should be a "mini-manual" ...

...circuit in my kitchen, plunging everything into darkness. I went to my fuse box, found the tripped breaker, and everything came back on, except the microwave. Is there a fuse or a breaker inside the ...

...grill and under the bulb cover. The light was on as I tried to feed the light into the light receptacle. As I did this the light went out and there was a small snapping noise. The microwave no longer ...

...trips, cutting the power until it turns off, then it closes to power it back up. It's essential that the internal cooling fan (I don't mean the hood / vent / exhaust fan) is running to be sure the ...

top front vent panel on the right side of the unit. What else could be the problem, nothing works? Since you posted this under model KHMS105EBL, I'll assume that's your model number. There should be a

...top of the cavity / body of the oven. If it goes dead for a while during or after cooking then comes back on, the magnetron is probably overheating and causing the magnetron thermostat to open. Then ...

...top of the cavity / body of the oven. If it goes dead for a while during or after cooking then comes back on, the magnetron is probably overheating and causing the magnetron thermostat to open. Then ...