GE Spacemaker JVM1640SJ Microwave Oven "bolts attach cabinet" Questions

...bolts that can be used to attach this microwave to the cabinet floor or shelf. Grease, paint, varnish all can make the case stick to the cabinet. You might try running a putty knife or scraper around ...

...bolts and several nails running into the wall studs. Did you look here? If yours is not there, I would contact GE Customer Service here. We're happy to help you with free advice and we'd appreciate ...

...bolts that hold it into the cabinet above. You will see these screws in the bottom shelf of the cabinet above your unit. A driver drill w/ the socket attachment to fit these "screws" would make it go ...

...need to remove it to install the new one. How do I detach it from the wall. There are no screws or bolts into the cabinets above or beside it. It appears to be attached only to the wall behind the ...

...cabinet and removing a few componets to get to the magnetron bolts/screws ... www.sears.com then hit the parts direct link up at top of the screen enter your model number and will give you a parts ...

bolts going through the cabinet into the top of the microwave. Have a helper hold the microwave in place before these bolts are removed. After the bolts are out,assist the helper by lowering the front

...bolts which connect the unit to the cabinet above. I cannot see what attachs the unit to the wall. When the two bolts are removed I don't understand how to proceed to unattach the unit from the wall. ...

...to the cabinet. Hope u can help... Thanks Alice Take off the bottom panel, underneith you will see two long bolts. have someone support the microwave and unscrew the bolts. off the wall it ...

...Attach the mounting bracket to the wall studs using the six wood screws included with your microwave. Screw the toggle nuts onto the toggle bolts and push one through each of the four drilled holes. ...

...bolts go all the way to the back of the microwave. Once you have turned them (you do not need to remove them), you will need to remove the one - three screws that come in from the cabinet above. You ...