...rectifier / filter caps. For me when I couldn't get a sound a put a a regular cable or 1/4 Mono to 1/8 Adapter in the back where it says "Return" but not all the way about half way through. Make sure ...
Hello. I am a old tech, so struggle a little bit with this unit. It appears that the 12 volt power relay is not getting any signal, thus the 110 is not connected to the first set of power sections. It
put it on a variac for a few hours at 50 volts then 80 volts and then full power. The caps may need to reform an oxide layer before full power is applied to them or they will short out. Or
...rectifier was shot replaced that, and i put it back together and keep blowing fuses. comes on for a few seconds and then thats it blows it again. i dont even know why, any idea would be appreciated ...
...put one probe on one side and the other probe on the other side. it should only ring out in one direction. you will be testing approx 6 diodes in this power grid on the pcb. you can also desolder the ...
...you ever lit plastic on fire. it smokes like crazy for the little bit it burns. so a resistor can put out a ton of smoke. wishful thinking. contact me if you need help at my website ...
Question about Marshall Amplification Music
...rectifier. If you have any other amplifier repair questions you can email me direct at [email protected]. Fading amp.
I had similar issues with my Marshall Valve state amp. It would play ...
51 questions posted
Usually answered in minutes!