Husqvarna Chainsaw Piston Kit for 61 Chain Saw "ring saw" Questions

...saw is attached, plug in the power cable that is on the end of the pole. One word of advice....there is a large locking collar ring that enables the two poles to extend and lock together. There has ...

compression test on poulan pro chain saw I got a 105 psi compression test, Is it OK ? Yes, but 100 or lower and you need to think about ring and/or cylinder, piston and ring set.

saw had ZERO power when cutting with new clutch, new chain and new bar. shop said need new piston and rings piston has heavy scratch on pitson and was pinching piston ring not allowing ring to flex or

...saw not run right. You might have to take the engine apart and check piston ring gap also the ring might be seized stopping it from moving up and down to follow worn cylinder wall and lowering the ...

...Remove spark plug and starter pulls through fine. Saw has not been run recently. Check piston rings. Sounds like you have a seized

...saw starts not very good power what eles can cause bad compression apart from pistion rings You should both the cylinder, piston, and ring as a set. If you have done this look around the cylinder for ...

...ring is worn out.Or possibly a hole in the piston.The only solution is to take it apart or replace saw.Depending on how old the saw is you might have trouble finding parts.Alot of companys will ...

...saw ran without oil, it may be that the ring(s) have stuck in the piston groove due to metal transfer from the piston into the ring groove. Sometimes you can see this by removing the muffler and ...

...THE COMBUSTION CHAMBER. I TOOK THE SAW TO A FRIEND WHO WORKS ON SAWS. HE SAYS THAT THE PISTON RINGS ARE FROZEN ON THE PISTON & THAT THE CYCLINDER IS RUINED-THAT IT LOOKS LIKE UNMIXED GAS HAS ...

...saw they said maybe the after market part is different but i got a complete piston,ring and cylinder so why would that make a difference at wits end I had a very similar problem with a stihl 029 farm ...