Vtech VT-2431 Cordless Phone "step register handset base" Questions

...register 1 handset at a time): Step 1: Place the handset in the base unit or a charger that is connected to a power outlet. If PRESS FIND HNDST 4 SEC ON BASE does not appear on the screen after a few ...

...register 1 handset at a time): Step 1: Place the handset in the base unit or a charger that is connected to a power outlet. If PRESS FIND HNDST 4 SEC ON BASE does not appear on the screen after a few ...

...Step 4: Press "OK" to de-register the correct handset. Press "yes" when you are asked if you are sure, and wait for the confirmation tone. Reset Handsets without the Base Step 1: Hold [] and [#] down ...

...register the handset. 1 Handset: {MENU} i {#}{1}{3}{0} 2 Base unit: Press and hold {LOCATOR} for 4 seconds until the registration tone sounds. L If all registered handsets start ringing, press the ...

..."Select" to complete the registration process. The handset should now be registered with the new base unit. Note: if you have multiple handset you need to register, repeat step 2-7 with each

register the handset(s) by following the steps below:1. After charging the handset, remove it from the cradle, the LCD display will read "SEARCHING FOR BASE".2. Press "NEW" and then enter the 15-digit

...Step 3: Re-register each system handset: At the base, press MENU, scroll to DISPLAY BASE-ID, then press OK. The 15-digit base ID number will be displayed. Step 4: Using the handset dialpad, enter the ...

register the handset.1 Handset:{MENU}2 {V}/{^}: “Initial setting”{OK}3 {V}/{^}: “Registration”{OK}4 {V}/{^}: “HS registration”{OK}5 Base unit:- KX-TG4011 series: Press and hold {LOCATOR} for 

...register the handset (see "De-register the Handset" on page 32) and register the handset (see "Register the Handset" on page 68). ? Make sure that you have registered all handsets. An extra handset ...

...Failed Making sure the handset is fully charged, then start over at step 1. To register a handset to a different base, see the section "Expanding Your phone" in the user's guide for the other