Hayward SAND FILTER, PRO SERIES "diffuser" Questions

When I changed Pentair Whiperflo motor with new Impeller & Diffuser seals the new motor shaft does not turn. Diffuser is pressing against Impellor not allowing it to rotate. What is wrong ? Take the ...

I am rebuilding a Northstar pump. I thought I had an o-ring between the diffuser and the impeller ring when disasembling. I don't see the on the schematic however. I do find a raised ring of ...

I need the impeller and diffuser for an water jet pump Utilitech UTP20P1 I need th impeller and diffuser Home Depot Lowes This is where the only place I have ever seen these brand of pump. Try there.

HOW DO YOU REMOVE AN IMPELLER FROM A FROM SHAFT Remove diffuser. Remove rear cover from motor. Hold shaft with either a screwdriver if shaft is slotted or 1/2" wrench if there is a flat on it. Unscrew

how can it put together a northstart pump? i put it apart to replace the diffuser, but it is to difficult to put it together. I used clamps to push the motor and the pump but it does not close Lube ...

in the pump and the impellar are clear I would get a "revamp" kit. O-rings for the housing, lid and diffuser. Sounds like the diffuser o-ring is bad or missing..

...the pump and when i turn pump on it kicks off-- technician said it was working fine in shop If the diffuser is worn and corroded and it was not replaced along with the impeller, than thenew impeller ...

Can anyone give me a # that works for Utilitech? I need a Impeller and diffuser kit and Lowes where we bought it from isn't any help, the number I have for Utilitech is busy...Thanks! pump impeller ...

...easy. If it is a northstar it is more difficult. Super pump. You will need 1 motor, 1 pump seal, 1 diffuser gasket, 1 housing gasket. turn off breaker, disconnect wires -noting whether it is 110 or ...