Hello, I need to adjust the low/high idle on my Husqvarna 435 X-Torg. I can't seem to find the necessary tool (looks like a socket "screwdriver"). Can you help? Thanks, --Scott There is a ...
435 chain saw and need to adjust carboorator but the adjustment screws have no way turning them. They are just round heads. New saw There is a special tool required, the part no is 530035560 available
...chainsaw 435 what type of tool do l use to adjust t screw? Where can i get it? the screws are on the side of the carb very small heads flat screw driver is needed as they have a cover on them it has ...
...435 from the store. It started right up used it for a half hour. Today I went to use the thing it started ok then quit after 5 minutes. Fresh fuel/oil............tried restarting again no ...
i have a 435 side tensioning and after around 30min of use the side mounting slackens cousing the chain to come off damaging the chain What is happening is the chain is heating, and expanding. Make ...
...435 wot run at full speed runs at idle fine and looks like u need a special tool for the high low carb adustment On that model the low adjustment may be factory set, and the adjustment screw is ...
HUSQVARNA MODEL 435 CHAIN SAW.....BRAND NEW IN JUNE...NEVER USED....WITH BLADE, CHAIN, AND SIDE COVER (TENSIONER ASSY) REMOVED, IT RUNS FINE......WHEN CHAIN BAR , CHAIN, AND COVER ARE REINSTALLED AND ...
Question about Husqvarna Garden
what kind of tool do i need to adjust jets on my 435 husky saw You need a special tool with an internall star pattern, part no. 530035560, check the web if the dealer will not supply you.
139 questions posted
Usually answered in minutes!
529 Questions
514 Questions
473 Questions
353 Questions
131 Questions
