Question about Air Tools & Compressors
...the contacts on battery and gun but still nothing First what kind of gun? If Paslode- may need new gas cartridge. And is power light green (still paslode gun.) If other type of gun can't help.
Question about Senco Air Tools & Compressors
...green light flash the the gun has afull battery the green light comes on the fan comes on when pressed the gas is new but the gun does not seem to want to fire it is virtually brand new i havent ...
...IM350 90CT Nail Gun gun light green gas full battery charged fan works gun wont fire Try a different gas cartridge and make sure the top of the cartridge is snapped tightly onto the cartridge
green light comes on fan comes on but gun doesn't shoot has plenty of fuel in canister ther is a depth adgustment on the front of the gun,try lowering the adjustment tip a little at a time.see if that
...was charged with green light on, took battery ouit & placed it back in charger & red light came on after doing this three times the battery was fully charged and the gun worked fine. ...
...cuts out , light flashes red & green gun apart just now, renewed cables.Pull the trigger the fan spins for a few sedconds & stops, light strarts flashing red & green Can denotes the motor has ...
green and the gun will fire once after which the light flashes red and the gun will not fire.any ideas.i have tryed other batteries but the problem continues.the gun is aprox 3 years old but clean and
Question about RTO Air Tools & Compressors
to surface and wont fire gun has green light up to the point when it is applied to fire then it goes red and nofire no fan no sound Unplug. Check that you don't have a nail jammed in the end of it
Question about RTO Air Tools & Compressors
...green and red, not working? Try cleaning the contacts on the battery and on the gun where the battery rests. Use a pencil eraser to clean the contacts. Sometimes the contacts get a little build up on ...
...gun and no green light... what do I check??? Bob I would start with the battery contacts to make sure not corroded or bent, if no light still then you would have to take the handle halves apart and ...
366 questions posted
Usually answered in minutes!
4 Questions
9 Questions