Proform Crosswalk 500 Treadmill "stop speed increased" Questions

...stop and speed up and place the safety key in its spot. release the stop and speed up. Press stop again. The windows on the console (speed & time) will be all zeros. Press speed up, the time ...

...speed it will not go up, no beeping is heard, it will decrease speed from 1 down until it stops with beeping heard at every push of the button. I suspect the console is bad but im looking ...

...stop and speed up simultaniously. 2: Attach the magnetic safety key. 3: press stop 1 time. 4: at this time, by pressing the incline up, the incline should calibrate, going up to maximum then back to ...

As I'm walking and increase the speed the treadmill just stops and des play says- looses speed How can I fix this it has never happened before This video has some troubleshooting answers Treadmill ...

...incline stops machine (incline on screen inclines), stop button doesn't do anything, hold down speed and will speed up but take pressure off and slows back to 1.0 Treadmill console needs to be ...

...stop, + speed button and attach the safety key. You should get the software version on the speed window. Continue to hit the stop button until you see zeros on the incline, speed, and heart rate ...

speed. i.e. from 2.5 to 6 mph instantly, like it had a mind of its own. finally, the stop button worked. is it software? or touch screen issues ? or both? book an engineer, sound like motor controller

...stop the speed from increasing. Can your man please advise, thanks. If it reaches 250km then I suspect that the upper electronics is not functioning properly contact the distributor of Stex and If ...

...the button is pressed . It will start at 1.0 and decrease when the down arrow is pressed until it stops. What do I need to try and Fix? only the up arrow button doesn't respond... so we can not ...

...stop & speed up key, insert the safety key/magnet. Press stop 1 more time. Press speed up, the speed display should start to increase in value. By 30-40, the motor should be running. If not, you ...