Samsung ML-1640 Monochrome Laser Printer "few minutes shuts" Questions

6480 won't shut down or boot up message is "shutting down" can't power it off or reboot Try unplugging the power for a few minutes, then plug in and retry.

few minutes then back on? when i push on button it turns on and goes thru its cycles then after a few minutes suddenly shuts off and the turns back on by itself. wont print either . when i try to copy

power cord out of the back of the printer, wait 10 seconds and plug the power back in... The printer should come back on and go through a self test for a few minutes before you are able to print again

...minutes, it will not print until power is recycled. Hi, Follow the steps . To cancel a print right click taskbar and open the printer and cancel the print . Wait for a minute and check has it ...

...few minutes. Again switch it On without the cartridges installed and without usb cable connected to it, press the power button several times while it boots up, and leave it on for few minutes, again ...

how do i reset my printer after using refills of cartiage Try shutting it offf and turn it back on after a few minutes. Bud

...majority of paper that was stuck in the shredder. I cannot get it to work Most shredders have an overheat safety shutoff. Once hot, it'll shut off and can be used after a few minutes of cooling

Turning power on causes MFC to cycle, can not shut off Try unplugging direclty from power source for a few minutes.

started blinking and saying "shutting down" but hasn't stopped I plugged it back in but it's been blinking like this for a few minutes HELP!! Just unplug it from the wall and plug it back in

printer light is blinking and not starting Hi sanjeevkagg, Try Restarting your printer by shutting it down for a few minutes.