Kenmore 700 sq. in. Cooking Area Gas Grill 14116325 "grill burner valve stuck" Questions

...grill about a month ago and now it wont stay lit flame very low in 1 burner and other burners no flame Probably 1 of 3 things: Check your LP tank valve at an LP filling station. Make sure both valve ...

burner, dissassembly and clean the valves on the grill NOT ON THE BOTTLE! this should solve the problem, alternatively, if burner was not used for long time, regulator maybe stuck in this position and

burner stays very small, will not give full power, any ideas on what the problem is? Disconnect tank, hook back up, open slowly everytime you use grill. If this doesn't solve problem, valve on tank is

...grill 30400042 If the knob is actually the problem the plastic "D" opening in back will show the physical damage. In this case we have replacement knobs. Usually when someone expresses a problem with ...

...Grill won't heat pass 300 degrees, burner and lines clear of obstruction, could the problem be in the regulator? yes, these regulators are known to get stuck. Try kinking the hose until you her a ...

...grill or burner, or your burner appears to be fine then the problem might be with the regulator. The regulator is a round metal object near the connector to your gas supply. Sometimes regulators get ...

...grill and will give you access to the burner controls behind the knobs. there is an almost diamond shaped metal piece with a screw in the top and one in the bottom that the know shaft runs through.. ...

...grill. Reconnect the hose to the tank and open the tank valve VERY, VERY SLOWLY (Slow motion, slow). Once the valve is fully open, test the side burner hose connection and the hose (squirrels like to ...

...burner I turn on. Flames linger in the box areas between burners. The grill is 2 years old and this problem has come and gone. Now its always stuck this way. Seems like not enough pressure to work ...

...problem, for me it was a bad tank of propane, the valve was stuck mostly closed. I returned it to the store, told them the valve was bad and they exchanged it for free. That solved the problem for