Loose Wand Connection I have a Kenmore Progressive Canister Vac #21612. The metal wand, right at the point where it plugs into the powerhead, does not make a solid contact, it has about 1/4 to 1/2 ...
Loose electrical contact in extension wand My power head works *sometimes" -- when I slide the extension up and down just right. How do I disassemble so I can repair this? You have a loose connection ...
...loose where the hose connects. Any ideas? Depending on the age of your 2100, you will need to replace, the wand cord, the handle wiring and perhaps theh upper wand inner tube and handle as well. If ...
...wand grabbed a loose string of carpet, wound it around and seized up. This has happened before so I cleared the string, cleaned the beater bar thoroughly and pressed the tiny reset button by the back ...
wand, creating the loose connection. I used the screwdriver to bend the pins down slightly (in the direction away from the wand tube), to compensate for the loose connection. This worked like a charm,
...wand loose then use the "adapter" to use the dusting brush or simply snap the crevice tool in place to use. If the handle won't come loose from the upper wand, then the described "tab" needs replaced ...
Question about Filter Queen Vacuums
...filter queen carpet attachment does not turn on Probably the plug in connector between the hose and wand or wand and head... check them for obvious arcing or looseness, visually or by wiggling the ...
...wand up as far as it will go With the rear of the cleaner facing you, follow the hose down to where it attaches at the base of the machine Grip the section of loose hose and pull it away from the ...
Question about Electrolux Vacuums
...on the power nozzle. The wires are bad to pull loose or even break inside. Take it to your local vac repair shop and have them look at it. You either have a bad wand or a bad swivel neck most
58 questions posted
Usually answered in minutes!
234 Questions
128 Questions
108 Questions
103 Questions
106 Questions