changed by doing this - You will see little plastic covers on the opposite side where the hinges and handles are currently located now. There are some little clips that hinge the screws on the top and
Question about Zanussi Refrigerators
...hinges. You may have to remove the front fascia at the top, and access the screws holding the top hinge on to the frame. Unscrew these and remove the door by lifting off the bottom hinge. With the ...
...reverse order (bottom to top) on the other side. If there are separate door stops on the bottoms of the doors near the hinges that keep the doors from swinging all the way open, make sure you move ...
reverse the hinges, it should be the top for the freezer, and the one in the middle support, both the freezer and the large door, you will not only move this to the other side but you may have to turn
side opposite from your hinge, you should be able to reverse the door. Second, open the doors and see if there are button covers on the face of the door frame opposite the hinge. If you have both, you
...these buttons/holes you can reverse the swing. If you do not have the predrilled holes on the other side, you can not reverse it. Most can be reversed so I am hoping yours is one of them. Good
...reverse order (bottom to top) on the other side. If there are separate door stops on the bottoms of the doors near the hinges that keep the doors from swinging all the way open, make sure you move ...
door. Move the handle over to the other side. Move the base hinge to the other side. Remove the decorative plastic plugs from the center hing and put them in the holes you just took them screw out of.
...a helper there as the door will be heavy. Once the door is off, remove the hinges, then move them to the opposite side and reattach the door to the fridge. Put those buttons in the new open holes.
67 questions posted
Usually answered in minutes!
1,239 Questions
824 Questions
623 Questions
625 Questions
