Question about KitchenAid Dishwashers
...wash cycle is completed The dishwasher has started to hum or whine several times during the cycle and even after the cycle is finished. This KitchenAid model does not have a macerator and the filters ...
Kitchenaid Superba Dishwasher - Restarts wash cycle Our dishwasher, after the cycle is complete, will restart on its own. sounds like bad console or bad control board.
Kitchenaide dishwasher latch will not stay closed. It pops open during washing cycle and the machine stops and does not complete the cycle The dishwasher was not properly leveled on installation. I ...
...dispenser will not open during wash cycle ( I have to leave the dispenser open). Appears also that the cycle is running longer to complete. replace dispenser .sears parts direct can order part for ...
...Dishwasher It runs through a complete cycle, but it does not appear that the water supply is getting into the machine during the cycle. When complete the soap power has piles just inside the door, ...
Dishwasher took 3 hours to complete cycle Kitchenaid KUDI01DLWH0 If you have set the unit to heated water or your hot water is not hot will delay the wash cycle. The heater in the dishwasher is very ...
complete cycle. Also turn down the heat on the hot water fed to the dishwasher. Try using water softener for better results. You can also add vinegar in the final rinse cycle. Please post back if more
Question about KitchenAid Dishwashers
...complete. Dishes looks dirt Where can I open up the Kitchen Built-in Dishwasher to remove old dirt that could not be washed away after the cycle is complete. if dirt is not being washed away it is ...
Question about KitchenAid Dishwashers
Dishwasher just keeps washing, it doesn't stop or attempt to cycle forward I've cancelled the current cycle and tried to start a different cycle. Nothing happens initially when I close the
Question about KitchenAid Dishwashers
...Dishwasher won't start. Press these keys : Heated Dry----> Normal-----> Heated Dry-----> Normal All the l.e.d.s should lite up and then, if you push start, it will go from function to ...
75 questions posted
Usually answered in minutes!
480 Questions
217 Questions
151 Questions
124 Questions
109 Questions