...e2 f6 so I changed the circuit board. Someone here mentioned putting a piece of paper in with the keytail (connector ribbon). I did that but still nothing. When I push the buttons, they don't make
...(also called ERC or clock). you don't need a "professional" to solve this problem. E1 -F2- = the keytail (connector ribbon) that plugs into the control board is not making good contact. first ...
...for me for about two weeks, then the problem happened again. the next fix i tried was to unplug the keytail (the ribbon connector) from the slot on the control panel. there is a clip in each side of ...
F2e1 error message help! need to reconnect keypad keytail. where is it located? It is the only ribon cable coming off of the control panel to the control board. This error could also indicate that the
...This is information from the Tech Sheet. Fault Code F2 - Error Code E1: Code Explanation: Keypad keytail not connected. Recommended Repair Procedure: 1. Check keypad connector for firm connection. ...
...1 minute. 3. If failure remains, disconnect power, replace control, then go back to step 2. F2 E1 Keytail unplugged 1. Verify that keypad is plugged into the connector on back of control. 2. ...
...actual moves minutes up. After a minute I am now getting an E1 F2 code which is detailed as Keypad keytail not connected. On the original control panel the slot where the ribbon connected was ...
...you don't need a "professional" to solve this problem or even to order any parts. E1 -F2- = the keytail (connector ribbon) that plugs into the control board is not making good contact. first ...
164 questions posted
Usually answered in minutes!
26 Questions
27 Questions