My KitchenAid tilt head lock keeps coming loose while beating small amount of dough allowing the head to wobble gradually bad? This is the second mixer with same problem! I've heard some people ...
Question about KitchenAid Food Mixers
New Artisan Kitchenaid mixer KSM150 out of the box, head won't lock. Lever won't slide all the way to lock. Locks slightly but still has up and down play in down position and won't lock at all in ...
Question about Bosch Food Mixers
My mixing bowl seems to be locked onto my Bosch Universal machine, cannot get it off. Anybody have a solution. I've tried turning it, using a crow bar, etc. the drive shaft still turns but bowl is ...
Question about MIXMASTER Food Mixers
I recently bought a used mixmaster stand mixer 2397. I found out that the beaters won't lock in place. Beaters should have a wire on top side to lock, if missing will not lock. OR if beaters won't go ...
Kitchenaid mixer will not lock If it is new take it back and get a service agent to sort it out for you. The solution can often involve filing out the locking slot. Make sure that the hinge pin is ...
How do you tilt the back up on the k45 kitchen stand mixer? To raise the head you move the locking lever back & lift the front of the motor unit up. To lower it you also move the locking lever to ...
Question about KitchenAid Food Mixers
Head does not lock but when adjusted whisk touches bowl The locking mechanism on my artisan tilt head mixer was not working so I adjusted the screw located when the tilt head is in its up position ...
Question about KitchenAid Food Mixers
Kitchenaid artisan mixer locking switch only locks 3/4 the way and motor head bounces when mixing dough, although is still locked down. Make sure that the hinge pin is locked up firmly with the grub ...
Kitchenaid mixer bowl clearance is barely clearing bowl but the head will not lock. If I adjust till the head can lock, the flat beater will be touching the bowl. Is there something wrong with the ...
Replacement of lock and unlock lever Need to know how to replace lock and unlock lever. Thanks, John Look for my posts on "Removing the motor cover". The lock is under the motor head. Its easy to find
234 questions posted
Usually answered in minutes!
493 Questions
357 Questions
285 Questions
205 Questions
89 Questions