KitchenAid KSM90 Ultra Power Series Stand Mixer "screws top side mixer" Questions

Ad

...screws (two on each side) holding on the top cover for the mixer. Remove the four screws and then lift off the top cover and you'll see the motor, circuit board and gear box that operate the

Ad

Question about KitchenAid Food Mixers

1 Answer

...side of the mixer base there is a hole that goes right through. There is a metal rod sticking out of this which I noticed is sticking out further than normal. I think the top of the mixer is dropping ...

Ad

Question about KitchenAid Food Mixers

1 Answer

...top part of the mixer has about 1/2 inch play and must be lifted in order to put in lock position It sounds like the bar that the head hinges on has come out. It is located on the base and should be ...

Question about KitchenAid Food Mixers

2 Answers

...screws that hold the top to the base.  These screws are under the motor.  I had to remove the motor, but this also required taking the transmission cover off.  Sounds harder than it ...

Question about KitchenAid Food Mixers

3 Answers

...can be removed. Now you will see two more phillips head screws on each side under where the band had been. Remove them and the top of the motor will lift off. good luck with it. please rate my

...top wobbles causing this "pin" to work it's way loose out the side. This has progressed to now the beaters scrapping the bottom of the mixing bowl when in use. There is no wear on the paint between ...

Question about KitchenAid Food Mixers

2 Answers

...top screws clockwise until they cannot be turned anymore. Leave the bottom screw alone for now. 2. Use a dab of white paint or paper whiteout to mark the positions of the Phillips screws. 3. Plug in ...

Question about KitchenAid Food Mixers

1 Answer

...top and bottom halves - look thru the hole in the stand until you can see the mixer's hole line up, then slide/tap the pin into the hole Now turn the mixer on its side and look for the screw in the ...

Question about KitchenAid Food Mixers

1 Answer

...top screws clockwise until they cannot be turned anymore. Leave the bottom screw alone for now. 2. Use a dab of white paint or paper whiteout to mark the positions of the Phillips screws. 3. Plug in ...

Question about Hobart Food Mixers

1 Answer

...the planetary take out plug let oil drain ,remove top cover take outstand off where front screw to top cover threads into put new oil in there till you hit line in sight glass on right side of

Not finding what you are looking for?
KitchenAid KSM90 Ultra Power Series Stand Mixer Logo

349 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...