I have a 2006 Suzuki Farenza, what type of motor oil should I use?

The hold light I thing keeps the car from rolling back on hills, some can it hill assist. You need the system control computer scanned for fault codes, then based on that you can diagnose the issues.

I don't agree that Fuze is good! I don't like the taste of it, and the drink has too much sugar in it!

http://www.carcarekiosk.com/video/2004_Suzuki_Forenza_S_2.0L_4_Cyl./oil/change_oil_and_oil_filter
Oil Filter Change Suzuki Forenza 2004 2008 2004 Suzuki Forenza 2 0L 4 Cyl

First remove upper plenum

Check that hour injectors are clean and correctly set. 12,5 l/100km is a very high consumption. Also check that the engine oil is not too full and that the engine breather is not sucking oil/fumes into the inlet sustem.

For this and most future questions, you can help yourself





http://cgi.ebay.com/ebaymotors/2006-Suzuki-Forenza-owners-manual-/350373310971?pt=Motors_Manuals_Literature&hash=item5193e071fb

2006 HONDA ODYSSEY 3.5L 6-cyl Engine Code J35A7 2006 HONDA ODYSSEY 3.5L 6-cyl Engine Code J35A6

Engine Oil Grade 1......API* All TEMPS......5W-20 synthetic oil or conventional. Brand name you preference. Fram oil filter Part #PH7317 Honda oil filter part #15400-PLC-003 or 004
CAPACITIES: Engine, with filter..........4.3 liters After refill check oil level. Torque Oil Drain Plug.....29 ft/lbs

most new car use 5w30 or 10w 30

underneath the engine at the lowest point there is a bolt about 17mm undo drain oil then put 17mm plug in fill the new filter with new oil before screwing back on and place oil around rubber ring on new filter so it seals properly fill with oil to low point on dipstick start car check oil filter for leaks turn car off let oil settle and check level again too much oil in a motor will cause problems so dont over fill hope this helps glenn...........