The cd player won't play the radio does - 2000 BMW K 1200 LT

If your CD is not scratched,the optical lens need replacement.

go to www.reliable-store.com you will get all info and
solutions there definitely

Duplicate post.

you can send the radio out for repair threw most radio shops

Your radio will need a code to reactive it because the power has been lost.

You need to post up the serial and part number of the radio - found on a label at the back so you will need to remove the radio from the dash to find this.

Make and model of radio and car also required. Then we can advise further.

Thanks for using fixYa.

HI lisasmith566 IT is not a fuse problem .
the problem is your the CD part of the radio
must likely the cd is stock or more likely the cd drive motor is defective .
FIRST try pushing eject on radio and see CD comes out if not you need a new radio .

good luck vote

Possibly the laser lens is not reading the cd. check closely to see if it's black. If it is, lens is burnt. ER means error

To resolve this issue, try one or all of the following:

• The Wave® music system is designed to play commercial CDs, CD-Rs, MP3-encoded CDS and CD-RWs. If your system has trouble playing MP3 CDs, make sure the discs were recorded with compatible formats. See Cannot play MP3 CDs



• The system may not be able to play certain CD-RW discs. Playability is dependant on how the disc was recorded, including the format it was recorded in and the actual disc used for recording.
  Note: iTunes defaults to AAC as the encoding format. In order to use iTunes to make CDs that will play on the Wave® music system, you’ll need to change the format to MP3 How to Choose Import Options



• Different brands of CD-Rs and CD-RWs use different materials which may affect the ability of a player to read them. If you are burning your own CD-Rs or CD-RWs, experiment with different brands of discs



• If a commercial disc won’t play, check for scratches, fingerprints or other physical damage. Try the CD in another player. If it still won’t play, there may be a problem with the disc



• Reset the system by disconnecting the power cord from the wall for one minute, then plug the system back in

Most likely the recorded format is wrong and that is the cause.