2003 VTX Ran Yesterday, today hit the start button and nothing happens. Had the battery checked and its good. The F1 light comes on and you here it priming but after that when you hit the start button nothing at all happens... I have no clue where to start to look since the battery is good. PLEASE help

https://www.bluetraxx.com/threads/warrior-electrical-problems.80210/

This forum might be of some help to you.

Take it to your local parts store and have them check the starter. They can do this without removing it. If your starters good then it has to be in your anti theft system but I would def begin with the stater. Quite often when they start to fail will do so intermitently.

Check your ground wire.

I’m happy to help further over the phone at https://www.6ya.com/expert/karl_14766549451f8563

This is going to sound strange, but I have to ask - Is it in PARK?

SOUND LIKE WEAK BATTERY.CHECK BATTERY CABLES MAKE SURE THEY ARE TIGHT FREE FROM CORROSSION.IF ALL IS GOOD.HAVE BATTERY CHARGED LOAD TESTED OR REPLACED IF BAD.MAKE SURE ALTERNATOR IS CHARGING BATTERY.WITH ENGINE RUNNING VOLTAGE AT THE BATTERY SHOULD BE 13.5 TO 14.5 VOLTS.IF NOT CHECK ALTERNATOR DRIVE BELT MAKE SURE BELT TENSIONER GOOD.CHECK ALTERNATOR B+ WIRE AND FIELD WIRE MAKE SURE THEY ARE NOT LOOSE OR DAMAGED.CHECK FUSE ALSO.ALL IS GOOD ALTERNATOR NOT CHARGING THE BATTERY..

You have a short circuiting cable that are hitting or touching a metal part. Check all your wiring cables.
Good enough?

When starting any engine, run engine until it will idle without the choke on, then ride.

I have the 2003 Honda Shadow 750 ACE and had a problem with the bike intermittently not wanting to start. All is good but when I hit the start button nothing would happen. Took it to the dealer and was about to pay them about $75 just to diagnose it when of the customers told me that the 2002-2003 Shadow line had came with a "sticky" clutch safety switch & starter button. First thing put the bike in neutral. If it starts, check that the (2)wires coming from the clutch lever are fully inserted(just push on them). If it still wont cut on, push the start button and "wiggle it" while pushed in. My problem came out to be the at the clutch safety switch. I removed the lever, pushed in the switch so that it popped out and sprayed the tiny hole on the side of the plastic switch with electric parts cleaner($3.00 @ the auto parts store for a 12oz. can). My bike hasn't had a problem since!

Hi

Check the starter leads, try giving the starter a tap !

Good luck !

John.